Approved Used at the Allett C20 fine-turf tier
The C20 is Allett’s narrower pedestrian cylinder mower in the C-Range — 20-inch (51 cm) reel, the same cartridge architecture as the wider C27 and C34, sized for smaller fine-turf surfaces. The Approved Used position lands the same engineering, the same UK-built sportsturf-grade cylinder geometry, the same cartridge ecosystem, at £2,395 — roughly 50% below the typical £4,500+ new RRP.
What “Approved Used” means at LLM Groundcare
This specific C20 has been:
- 47-point pre-sale workshop check — engine compression, drive belts, reel-to-bedknife geometry, cylinder condition, height adjustment, frame integrity, cartridge interface
- Reel grinding included — cylinder ground to manufacturer-spec geometry before listing
- 2022 build year, 480 hours — well within our ≤7 years / ≤3,500 hours category ceiling
- 180-day parts and labour warranty from the date of delivery
- Inspection report on file — available on request before purchase
Full terms on the Used Mowers and Warranty pages.
Spec snapshot
| Cutting width | 20 inches (51 cm) |
|---|---|
| Cylinder | Multi-blade fine-turf (cartridge-swappable) |
| Drive | Belt drive, self-propelled walking pace |
| Cut height | Adjustable from 4 mm |
| Slope rating | 8° |
| Best fit | Single-green bowling clubs, small cricket squares, heritage formal lawns 200-600 m² |
Why Allett used inventory holds value
The quieter argument that justifies the Approved Used path on Allett cylinders specifically: turf-shop maintenance discipline. Bowling clubs and cricket clubs running fine-turf programmes maintain their cylinder mowers obsessively — the surface condition is the central operational variable of the venue. A 480-hour C20 with documented service history typically has reel-to-bedknife geometry still inside fine-turf tolerance, frame integrity well within spec, and an engine in well-maintained condition.
For clubs running 100-200 hours per year on a single green or small square, this specific machine has another five to seven years of working life ahead before approaching workshop renewal.
Where the Approved Used C20 actually earns its keep
Three typical buyer profiles. First: a single-green bowling club where the green is the central club asset and championship-grade cut quality matters but the £4,500+ new C20 capex would push the equipment-budget cycle past the club’s preferred refresh interval. Second: a cricket club covering small cricket squares and immediate outfield strips where the C20’s narrower 20-inch format suits tighter geometry better than the wider C27 or Buffalo 24. Third: a heritage venue (small National Trust property, college croquet lawn, university president’s-house formal lawn) running formal-lawn programmes in the 200-600 m² band where championship-grade cut quality matters but the smaller surface area doesn’t justify the wider C-Range alternatives.
The tradeoff vs new
New C20: full Allett manufacturer warranty (longer than our 180-day cover), zero hours on the clock, full new-machine cartridge ecosystem. Approved Used at £2,395: same engineering at roughly half the spend, our 180-day cover, full service history, inspection report on file. For clubs and heritage venues running tight capital programmes, the maths almost always works at this category tier.
LLM Groundcare positioning
LLM Groundcare is a UK specialist in Allett cylinder mowing equipment, supplying Approved Used C20 inventory with pre-delivery reel grinding, full setup, and seasonal greenkeeper-team support. Approved Used pricing typically sits up to 50% below new RRP; new C20 inventory, when in stock, sits around 30% below the UK market average.
